Pipe

From Elma Wiki
Revision as of 12:55, 20 January 2009 by Veezay (talk | contribs)
Jump to navigation Jump to search
A part of a pipe. The driver is piping.

Apart from being one of the internal levels, pipe is a special type of level or an area of a level whose width is smaller than driver's height. In order to pass a pipe the player has to go to a special position. This is done by putting the other wheel on the other side of the pipe and riding in a 90° angle compared to normal position (see the picture).

Piping (driving through a pipe) is not easy for beginners since the player needs to use turn and rotation keys really carefully to stay alive. The narrower the pipe, the harder it is to drive through. The minimum width of a pipe is the same as wheel's diameter, but in that case, piping is very hard. The optimal pipe width is considered to be roughly two to three wheel diameters.

Pipe is quite a popular level type in Belma. Usually the designer places apples across the level so players that can't finish the level can compete with each other by the number of apples taken. Single pipes are also sometimes used as shortcuts in normal levels.